Storage
Supplied in 10 mM sodium HEPES (pH 7.5), 150 mM NaCl, 100 µg/ml BSA and 50% glycerol. Store at –20°C. Do not aliquot the antibody.
Western Blotting Protocol
For western blots, incubate membrane with diluted primary antibody in 5% w/v BSA, 1X TBS, 0.1% Tween® 20 at 4°C with gentle shaking, overnight.
NOTE: Please refer to primary antibody product webpage for recommended antibody dilution.
A. Solutions and ReagentsFrom sample preparation to detection, the reagents you need for your Western Blot are now in one convenient kit: #12957 Western Blotting Application Solutions Kit
NOTE: Prepare solutions with reverse osmosis deionized (RODI) or equivalent grade water.
20X Phosphate Buffered Saline (PBS): (#9808) To prepare 1 L 1X PBS: add 50 ml 20X PBS to 950 ml dH2O, mix. 10X Tris Buffered Saline (TBS): (#12498) To prepare 1 L 1X TBS: add 100 ml 10X to 900 ml dH2O, mix. 1X SDS Sample Buffer: Blue Loading Pack (#7722) or Red Loading Pack (#7723) Prepare fresh 3X reducing loading buffer by adding 1/10 volume 30X DTT to 1 volume of 3X SDS loading buffer. Dilute to 1X with dH2O. 10X Tris-Glycine SDS Running Buffer: (#4050) To prepare 1 L 1X running buffer: add 100 ml 10X running buffer to 900 ml dH2O, mix. 10X Tris-Glycine Transfer Buffer: (#12539) To prepare 1 L 1X Transfer Buffer: add 100 ml 10X Transfer Buffer to 200 ml methanol + 700 ml dH2O, mix. 10X Tris Buffered Saline with Tween® 20 (TBST): (#9997) To prepare 1 L 1X TBST: add 100 ml 10X TBST to 900 ml dH2O, mix. Nonfat Dry Milk: (#9999). Blocking Buffer: 1X TBST with 5% w/v nonfat dry milk; for 150 ml, add 7.5 g nonfat dry milk to 150 ml 1X TBST and mix well. Wash Buffer: (#9997) 1X TBST. Bovine Serum Albumin (BSA): (#9998). Primary Antibody Dilution Buffer: 1X TBST with 5% BSA; for 20 ml, add 1.0 g BSA to 20 ml 1X TBST and mix well. Biotinylated Protein Ladder Detection Pack: (#7727). Blue Prestained Protein Marker, Broad Range (11-250 kDa): (#59329). Blotting Membrane and Paper: (#12369) This protocol has been optimized for nitrocellulose membranes. Pore size 0.2 µm is generally recommended. Secondary Antibody Conjugated to HRP: Anti-rabbit IgG, HRP-linked Antibody (#7074). Detection Reagent: SignalFire™ ECL Reagent (#6883).B. Protein BlottingA general protocol for sample preparation. Treat cells by adding fresh media containing regulator for desired time. Aspirate media from cultures; wash cells with 1X PBS; aspirate. Lyse cells by adding 1X SDS sample buffer (100 µl per well of 6-well plate or 500 µl for a 10 cm diameter plate). Immediately scrape the cells off the plate and transfer the extract to a microcentrifuge tube. Keep on ice. Sonicate for 10–15 sec to complete cell lysis and shear DNA (to reduce sample viscosity). Heat a 20 µl sample to 95–100°C for 5 min; cool on ice. Microcentrifuge for 5 min.Load 20 µl onto SDS-PAGE gel (10 cm x 10 cm).
NOTE: Loading of prestained molecular weight markers (#59329, 10 l/lane) to verify electrotransfer and biotinylated protein ladder (#7727, 10 l/lane) to determine molecular weights are recommended.
Electrotransfer to nitrocellulose membrane (#12369).C. Membrane Blocking and Antibody IncubationsNOTE: Volumes are for 10 cm x 10 cm (100 cm2) of membrane; for different sized membranes, adjust volumes accordingly.
I. Membrane Blocking (Optional) After transfer, wash nitrocellulose membrane with 25 ml TBS for 5 min at room temperature. Incubate membrane in 25 ml of blocking buffer for 1 hr at room temperature. Wash three times for 5 min each with 15 ml of TBST.II. Primary Antibody Incubation Incubate membrane and primary antibody (at the appropriate dilution and diluent as recommended in the product webpage) in 10 ml primary antibody dilution buffer with gentle agitation overnight at 4°C. Wash three times for 5 min each with 15 ml of TBST. Incubate membrane with Anti-rabbit IgG, HRP-linked Antibody (#7074 at 1:2000) and anti-biotin, HRP-linked Antibody (#7075 at 1:1000–1:3000) to detect biotinylated protein markers in 10 ml of blocking buffer with gentle agitation for 1 hr at room temperature. Wash three times for 5 min each with 15 ml of TBST. Proceed with detection (Section D).D. Detection of ProteinsDirections for Use: Wash membrane-bound HRP (antibody conjugate) three times for 5 minutes in TBST. Prepare 1X SignalFire™ ECL Reagent (#6883) by diluting one part 2X Reagent A and one part 2X Reagent B (e.g. for 10 ml, add 5 ml Reagent A and 5 ml Reagent B). Mix well. Incubate substrate with membrane for 1 minute, remove excess solution (membrane remains wet), wrap in plastic and expose to X-ray film.* Avoid repeated exposure to skin.
posted June 2005
revised June 2020
Specificity / Sensitivity AHSA1 Antibody recognizes endogenous levels of total AHSA1 protein.Species Reactivity:
Human, Mouse, Rat, Monkey
Source / Purification
Polyclonal antibodies are produced by immunizing animals with a synthetic peptide corresponding to residues surrounding Leu242 of human AHSA1 protein. Antibodies are purified by protein A and peptide affinity chromatography.
Background Activator of 90 kDa heat shock protein ATPase homolog 1 (AHSA1 or AHA1) is a 42 kDa HSP90 co-chaperone that stimulates intrinsic HSP90 ATPase activity in eukaryotic cells to facilitate client protein folding and activation (1,2). Initially, HSP90 forms a ternary complex with a nascent client protein such as v-Src, c-Raf or CFTR, and the co-chaperone protein CDC37 (3,4). HSP90 then cycles through a series of conformational changes facilitated by ATP that results in the release of CDC37 and recruitment of AHSA1 - a process that is dependent on tyrosine phosphorylation of HSP90 and CDC37 (5). More recently, AHSA1 has been shown to have unique interactions with additional client proteins involved in RNA splicing and DNA repair, suggesting that AHSA1 may have also have a scaffolding role in recruiting client proteins to HSP90 (6). Panaretou, B. et al. (2002) Mol Cell 10, 1307-18.
除非 CST 的合法授书代表以书面形式书行明确同意，否书以下条款适用于 CST、其关书方或分书商提供的书品。 任何书充本条款或与本条款不同的客书条款和条件，除非书 CST 的合法授书代表以书面形式书独接受， 否书均被拒书，并且无效。
专品专有\"专供研究使用”的专专或专似的专专声明， 且未专得美国食品和专品管理局或其他外国或国内专管机专专专任何用途的批准、准专或专可。客专不得将任何专品用于任何专断或治专目的， 或以任何不符合专专声明的方式使用专品。CST 专售或专可的专品提供专作专最专用专的客专，且专用于研专用途。将专品用于专断、专防或治专目的， 或专专售（专独或作专专成）或其他商专目的而专专专品，均需要 CST 的专独专可。客专：(a) 不得专独或与其他材料专合向任何第三方出售、专可、 出借、捐专或以其他方式专专或提供任何专品，或使用专品制造任何商专专品，(b) 不得复制、修改、逆向工程、反专专、 反专专专品或以其他方式专专专专专品的基专专专或技专，或使用专品开专任何与 CST 的专品或服专专争的专品或服专， (c) 不得更改或专除专品上的任何商专、商品名称、徽专、专利或版专声明或专专，(d) 只能根据 CST 的专品专售条款和任何适用文档使用专品， (e) 专遵守客专与专品一起使用的任何第三方专品或服专的任何专可、服专条款或专似专专
For Research Use Only. Not For Use In Diagnostic Procedures. Cell Signaling Technology is a trademark of Cell Signaling Technology, Inc. Tween is a registered trademark of ICI Americas, Inc.Changing to another country might result in loss of shopping cart.
Country/Region
